Veröffentlichungen

Suche

Aktuelle Veröffentlichungen

  • Rietzel, D.; Drexler, M.; Kühnlein, F.; Drummer, D.:
    Influence of temperature fields on the processing of polymer powders by means of laser and mask sintering technology. In: Proceedings SFF Symposium, Austin (TX), USA, pp. 252-262.

 

Veröffentlichungen im Vorfeld des Sonderforschungsbereich 814

A1 |  A2 |  A3 |  A4 |  A5 |  B1 |  B2 |  B3 |  B4 |  B5 |  B6 |  C2 |  C3 | C4

Teilprojekt A1

  • Knieke, C.; Berger, A.; Voigt, M.; Klupp Taylor, R.; Röhrl, J.; Peukert, W.:
    Scalable production of graphene sheets by mechanical delamination. Carbon 48 (2010), S. 3196-3204.
  • Armstrong, P.; Knieke, C.; Mackovic, M.; Frank, G.; Hartmair, A.; Göken, M.; Peukert, W.:
    Microstructural evolution during deformation of tin dioxide nanoparticles in a comminution process. Materialia Acta 57 (2009) 10, S. 3060-3071.
  • Knieke, C.; Sommer, M.; Peukert, W.:
    Identifying the apparent and true grinding limit. Powder Technology 195 (2009) 1, S. 25-31.
  • Meier, M.; John, E.; Wieckhusen, D.; Wirth, W.; Peukert, W.:
    Generally applicable breakage functions derived from single particle comminution data. Powder Technology 194 (2009) 1-2, S. 33-41.
  • Kohut, A.; Voronov, A.; Peukert, W.:
    An effective way to stabilize colloidal particles dispersed in polar and nonpolar media. Langmuir 23 (2007) 2, S. 504-508.
  • Schneider, L.; Schmid, H.; Peukert, W.:
    Influence of particle size and concentration on the second harmonic signal generated at colloidal surfaces. Appl. Phys. B, 87 (2007) 2, S. 333-339.
  • Voronov, A.; Kohut, A.; Synytska, A.; Peukert, W.:
    Mechanochemical modification of silica with poly(1-vinyl-2-pyrolidone) by grinding in a stirred media mill. J. Appl. Polymer Science 104 (2007) 6, S. 3708-3714.
  • Stenger, F.; Mende, S.; Schwedes, J.; Peukert, W.:
    Nanomilling in stirred media mills. Chem. Eng. Sci. 60 (2005) 16, S. 4557-4565.
  • Vogel, L.; Peukert, W.:
    From single particle impact behaviour to modelling of impact mills. Chem. Eng. Sci. 60 (2005) 18, S. 5164-5176.
  • Mende, S.; Schwedes, J.; Stenger, F.; Peukert, W.:
    Mechanical production and stabilisation of submicron particles in stirred ball media mills. Powder Technology 132 (2003) 1, S. 64-73.
  • Vogel, L.; Peukert, W.:
    Breakage behaviour of different materials - construction of master curve for the breakage probability, Powder Technology 129 (2003) 1-3, S. 101-110.
  • Peukert, W.; Vogel, L.:
    Product Engineering am Beispiel des Zerkleinerns von Kunststoffen. Chem.-Ing.-Tech. 73 (2001) 4, S. 327-331.

Teilprojekt A2

  • Damm, C.; Mallembakam, M. R.; Peukert, W.:
    Effect of grinding conditions on mechanochemical grafting of poly(1-vinyl-2-pyrrolidone) onto quartz particles. Advanced Powder Technology 21 (2010) 1, S. 50-56.
  • Strer, T.; Schober, M.; Wirth, K.-E.:
    Design of new fluidized bed reactors for CVD-processes. In: Proceedings Fluidization XIII (Gyeongju, Korea, 2010) - Tagungsband.
  • Collin, A.; Wirth, K.-E.; Ströder, M.:
    Characterization of an annular fluidized bed.  Powder Technology 190 (2009) 1-2, S. 31-35.
  • Linsenbühler, M.; Werth, J. H.; Dammer, S. M.; Knudsen, H. A.; Hinrichsen, H.; Wirth, K.-E.; Wolf, D. E.:
    Cluster size distribution of charged nanopowders in suspensions. Powder Technology 167 (2006) 3, S. 124-133.
  • Linsenbühler, M.; Wirth, K.-E.:
    Importance of interparticulate interactions for the morphology and the behavior of functionalized composite particles. In: S. Linz, Ch. Krülle, P. Walzel (Hrsg.): Behavior of granular media (Aachen, 2006) - Tagungsband S. 83-88.
  • Wirth, K.-E.; Linsenbühler, M.:
    Tailoring the properties of micro-particles for industrial applications using dry powder coating. In: Proceedings “Fifth world congress on particle technology” (Orlando, USA, 23.- 27.4.2006) - Tagungsband.
  • Linsenbühler, M.; Wirth, K.-E.:
    An innovative dry powder coating process in non-polar liquids producing tailormade micro-particles. Powder Technology 158 (2005) 1-3, S. 3-20.
  • Rossmeissl, K.-E.; Wirth, K.-E.:
    Hydrodynamics in Orifice-nozzles and the Jet-breakup of Superheated Liquids. In: Proceedings 20th Annual Conference Atomization and Spray Systems, ILASS (Orléans, 5.-7. Sept. 2005) - Tagungsband.
  • Huber, G.; Wirth, K.-E.:
    Electrostatically supported surface coating of solid particles in liquid nitrogen for use in dry-powder-inhalers. Powder Technology 134 (2003) 3,
    S. 181-192.
  • Zhou, H.-B.; Götzinger, M.; Peukert, W.:
    The influence of particle charge and roughness on particle-substrate adhesion. Powder Technology 135-136 (2003), S. 82-91.
  • Vogel L.; Peukert W.:
    Breakage behaviour of different materials - construction of master curve for the breakage probability. Powder Technology 129 (2003) 1-3, S. 101-110.
  • Molerus, O.; Wirth, K.-E.:
    Heat transfer in fluidized beds. London: Chapman & Hall, 1997.

Teilprojekt A3

  • Drummer, D.; Rietzel, D.; Kühnlein, F.:
    Development of a characterization approach for the sintering behavior of new thermoplastics for selective laser sintering. Physics Procedia 5 (2010) 1, S. 533-542.
  • Rietzel, D.; Kühnlein, F.; Drummer, D.:
    Characterization of new thermoplastics for additive manufacturing by selective laser sintering. In: 68th Annual Technical Confer-ence of the Society of Plastics Engineers 2010, ANTEC 2010 (Orlando, USA, 16.-20.05.2010) - Tagungsband, S. 2247-2253.
  • Kirchhof, M.; Schmid, H.-J.; Peukert, W.:
    Three-dimensional simulation of viscous flow agglomerate sintering. Phys. Rev. E 80 (2009) 2, S. 026319.1- 026319.9.
  • Drummer, D.; Kühnlein, F.; Rietzel, D.:
    Funktionalisierte Bauteile durch Selektives Maskensintern. RTejournal - Forum für Rapid Technologie 6 (2009).
    URL: http://www.rtejournal.de/ausgabe6/2215/ [16.11.2010].
  • Zhou, H.; Peukert, W.:
    Modeling adhesion forces between deformable bodies by FEM and Hamaker summation. Langmuir 24 (2008) 4, S. 1459-1468.
  • Li, Q.; Rudolph, V.; Peukert, W.:
    London-van der Waals adhesiveness of rough particles. Powder Technology 161 (2006) 3, S. 248-255.
  • Linsenbühler, M.; Wirth, K.-E.:
    An innovative dry powder coating process in non-polar liquids producing tailor-made microparticles. Powder Technology 158 (2005) 1-3, S. 3-20.
  • Peukert, W.; Götzinger, M.:
    Understanding particle interactions from a microscopic view of particulate interfaces. Particuology 3 (2005) 1-2, S. 14-18.
  • Götzinger, M.; Peukert, W.:
    Particles adhesion force distributions on rough surfaces. Langmuir 20 (2004) 13, S. 5298-5303.
  • Götzinger, M.; Peukert, W.:
    Adhesion forces of spherical alumina particles on ceramic substrates. Journal of Adhesion 80 (2004) 3, S. 223-242.
  • Götzinger, M.; Peukert, W.:
    Disperse forces of particle - surface interactions: direct AFM measurements and modelling. Powder Technology 130 (2003), S. 102-109.
  • Zhou, H.; Götzinger, M.; Peukert, W.:
    The influence of particle charge and roughness on particle-substrate adhesion. Powder Technology 135-136 (2003), S. 82-91.

Teilprojekt A4

  • Drummer, D.; Rietzel, D.; Kühnlein, F.:
    Development of a characterization approach for the sintering behavior of new thermoplastics for selective laser sintering. Physics Procedia 5 (2010) 1, S. 533-542.
  • Kühnlein, F.; Drummer, D.; Rietzel, D.:
    Degradation Behavior and Material Properties of PA12-Plastic Powders Processed by Powder Based Additive Manufacturing Technologies. In: International Conference on Additive Technologies 2010 (Nova Gorica, Slovenia, 22.-24.09.2010) - Tagungsband.
  • Rietzel, D.; Kühnlein, F.; Drummer, D.:
    Characterization of new thermoplastics for additive manufacturing by selective laser sintering. In: 68th Annual Technical Confer-ence of the Society of Plastics Engineers 2010, ANTEC 2010 (Orlando, USA, 16.-20.05.2010) - Tagungsband, S. 2247-2253.
  • Kühnlein, F.; Rietzel, D.; Drummer, D.:
    Feasibility Study of Additive Manufacturing of Thermally Conductive PA12 Powders by Selective Mask Sintering. In: 68th Annual Technical Conference of the Society of Plastics Engineers 2010, ANTEC 2010 (Orlando, USA, 16.-20.05.2010) - Tagungsband, S. 2295-2300.
  • Wartzack, S; Drummer, D.; Wittmann, S.; Stuppy, J.; Rietzel, D.; Tremmel, S.; Kühnlein, F.:
    Besonderheiten bei der Auslegung und Gestaltung lasergesinterter Bauteile. RTejournal - Forum für Rapid Technologie 7 (2010).
    URL: http://www.rtejournal.de/ausgabe7/2362/ [23.11.2010].
  • Drummer, D; Kühnlein, F.; Rietzel, D.; Hülder, G.:
    Untersuchung der Materialalterung bei pulverbasierten Schichtbauverfahren. RTejournal - Forum für Rapid Technologie 7 (2010).
    URL: http://www.rtejournal.de/ausgabe7/2601/ [2010-07-26].
  • Drummer, D.; Rietzel, D.; Kühnlein, F.:
    Selektives Lasersintern von teilkristallinen Thermoplasten. RTejournal - Forum für Rapid Technologie 6 (2009).
    URL: http://www.rtejournal.de/ausgabe6/2215/ [23.11.2010]
  • Drummer, D.; Kühnlein, F.; Rietzel, D.:
    Funktionalisierte Bauteile durch Selektives Maskensintern. RTejournal - Forum für Rapid Technologie 6 (2009).
    URL: http://www.rtejournal.de/ausgabe6/2215/ [23.11.2010].

Teilprojekt A5

  • Amend, P.; Pscherer, C.; Rechtenwald, T.; Frick, T.; Schmidt, M.:
    A fast and flexible method for manufacturing 3D molded interconnect devices by the use of a rapid prototyping technology. In: Proceedings of the 6th LANE 2010 Laser Assisted Net Shape Engineering, Volume 1/2 (Erlangen, 21-24.09.2010) - Tagungsband.
  • Schmidt, M.; Kolleck, R.; Grimm, A.; Veit, R.; Bartkowiak, K.:
    Direct Laser Deposition of Cu Alloy on forming tool surfaces - process window and mechanical properties. CIRP Annals - Manufacturing Technology 59 (2010) 1, S. 211-214.
  • Königer, T.; Rechtenwald, T.; Al-Naimi, I.; Frick, T.; Schmidt, M.; Münstedt, H.:
    CO2-Laser Treatment of Indium Tin Oxide Nanoparticle Coatings on Flexible Polyethyleneterephthalate Substrates. Journal of Coatings Technology and Research 7 (2010) 2, S. 261-269.
  • Weigl, M.; Schmidt, M.:
    Modulated laser spot welding of dissimilar copper-aluminium connections. In: Proceedings of 4M/ICOMM conference (Karlsruhe, 23-25.09.2009) - Tagungsband, S. 211-214.
  • Govekar, E.; Jerič, A.; Weigl, M.; Schmidt, M.:
    Laser droplet generation: Application to droplet joining. CIRP Annals - Manufacturing Technology 58 (2009) 1, S. 205-208.
  • Schmidt, M.; Otto, A.; Kägeler, C.:
    Analysis of YAG Laser Lap-Welding of Zinc Coated Steel Sheets. CIRP Annals - Manufacturing Technology 57 (2008) 1, S. 213-216.
  • Klämpfl, F.; Schmidt, M.; Hagenah, H.:
    Intelligent irradiation planning for new laser applications. In: De Vin, L. (Hrsg.): Proceedings of the 18th International Conference on Flexible Automation and Intelligent Manufacturing FAIM (Skövde, Schweden, 2008) - Tagungsband, S. 924-930.
  • Klämpfl, F.; Schmidt, M.; Hagenah, H.; Geiger, M.:
    Algorithms for Irradiation Planning in Medical Laser Applications. In: Teti, R. (Hrsg.): Proceedings of the 5th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering (Ischia, Italien, 25-28.07.2006) - Tagungsband, S. 101-106.

Teilprojekt B1

  • Müller, M.-K.; Luding, S.; Pöschel, T.:
    Force statistics and correlations in dense granular packings. Chem. Phys. 375 (2010) 2-3, S. 600-605.
  • Wolf, D. E.; Pöschel, T.; Schwager, T.; Weuster, A.; Brendel, L.:
    Fractal Substructures due to Fragmentation and Reagglomeration. In: Powders and Grains 2009: 6th International Conference on Mircomechanics of Granular Matter (Colorado, 2009) - Tagungsband, S. 859-862.
  • Pöschel, T.; Brillantov, N; Formella, A.; Heckel, M.; Krülle, C.; Müller, P.; Saluena, C.; Schwager, T.:
    Contact of granular particles and the simulation of rapid flows using event-driven molecular dynamics. European Journal of Environmental and Civil Engi-neering 12 (2008) 7-8, S. 827-870.
  • Schwager, T.; Wolf, D. E.; Pöschel, T.:
    Fractal Substructure of Nanopowder. Phys. Rev. Lett. 100 (2008) 21, S. 218002.1-218002.4.
  • Brilliantov, N. V.; Albers, N.; Spahn, F.; Pöschel, T.:
    Collision dynamics of granular particles with adhesion. Phys. Rev. E 76 (2007) 5, S. 051302.1-051302.12.
  • Pöschel, T.; Schwager, T.:
    Computational Granular Dynamics: Models and Algorithms. Berlin: Springer, 2005.

Teilprojekt B2

  • Körner, C.; Schwerdtfeger, J.; Singer, R. F.:
    Auxetic Cellular Metals. In: MetFoam - Proceedings of the 6th International Conference on Porous Metals and Metallic Foams 2010 (Bratislava, 2009) - Tagungsband.
  • Schwerdtfeger, J.; Heinl, P.; Singer, R. F.; Körner, C.:
    Auxetic cellular structures through selective electron-beam melting. Physica Status Solidi B 247 (2010) 2, S. 269-272.
  • Ponader, S.; von Wilmowsky, C.; Widenmayer, M.; Lutz, R.; Heinl, P.; Körner, C.; Singer, R. F.; Nkenke, E.; Neukam, F. W.; Schlegel K. A.:
    In vivo performance of selective electron beam-melted Ti-6Al-4V structures. Journal of Biomedical Materials Research - Part A 92 (2010) 1, S. 56-62.
  • Schwerdtfeger, J.; Heinl, P.; Singer, R. F.; Körner, C.:
    Selective Electron Beam Melt-ing: A New Way to Auxetic Cellular Structures. In: Bourell, D.L.; et al. (Hrsg.): Solid Freeform Fabrication Symposium, Proceedings of 20th Solid Freeform Fabrication Symposium (Austin, USA, 03.-05.08.2009) - Tagungsband, S. 727-729.
  • Heinl, P.; Körner, C.; Singer, R. F.:
    Selective electron beam melting - A novel generative manufacturing technique for cellular titanium. In: Lefebvre, L.P.; et al. (Hrsg.): MetFoam 2007, Proceedings of the 5th International Conference on Porous Metals and Metallic Foams (Montreal, Canada, 05.-07.09.2007) - Tagungsband, S. 43-46.
  • Heinl, P.; Körner, C.; Singer, R. F.:
    Selective electron beam melting of cellular titanium: Mechanical properties. Advanced Engineering Materials 10 (2008) 9, S. 882-888.
  • Heinl, P.; Körner, C.; Singer, R. F.:
    Mechanically Adapted Cellular Titanium for Bone Substitution. In: Stephani, G.; et al. (Hrsg.): Cellmet 2008, Proceedings of the International Symposium on Cellular Metals for Structural und Functional Applications (Dresden, 08.-10.10.2008). - Tagunsband, S. 69-74.
  • Ponader, S.; Wilmowsky, C. v.; Rottmair, A.; Körner, C.; Singer, R. F.; Holst, S.; Schlegel, K. A.; Neukam, F. W.; Nkenke, E.:
    Effects of topographical surface modifications of electron beam melted (EBM) Ti-6Al-4V titanium on human fetal osteoblasts. Journal of Biomedical Materials Research Part A 84 (2008) 4, S. 1111-1119.
  • Heinl, P.; Müller, L.; Körner, C.; Singer, R. F.; Müller, F. A.:
    Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting. Acta Biomaterialia 4 (2008) 5, S. 1536-1544.
  • Heinl, P.; Rottmair, A.; Körner, C.; Singer, R. F.:
    Cellular Titanium by Selective Electron Beam Melting. Advanced Engineering Materials 9 (2007) 5, S. 360-364.

Teilprojekt B3

  • Rietzel, D.; Kühnlein, F.; Drummer, D.:
    Characterization of new thermoplastics for additive manufacturing by selective laser sintering. In: 68th Annual Technical Conference of the Society of Plastics Engineers 2010, ANTEC 2010 (Orlando, USA, 16.-20.05.2010) - Tagungsband, S. 2247-2253.
  • Kühnlein, F.; Rietzel, D.; Drummer, D.:
    Feasibility Study of Additive Manufacturing of Thermally Conductive PA12 Powders by Selective Mask Sintering. In: 68th Annual Technical Conference of the Society of Plastics Engineers 2010, ANTEC 2010 (Orlando, USA, 16.-20.05.2010) - Tagungsband, S. 2295-2300.
  • Drummer, D.; Rietzel, D.; Kühnlein, F.:
    Influence of Time and Temperature on the Material Behaviour in Powder Based Additive Manufacturing. In: Drstvensek, I.; Dolinsek, S. (Hrsg.): Additive Layered Manufacturing: Education, Application and Business, Maribor, 2010, S. 87-100.
  • Jungmeier, A.; Ehrenstein, G.W.; Drummer, D.:
    Improving properties of microparts by slow cooling. In: SPE Plastics Research Online, 2010. DOI: 10.1002/spepro.4038
  • Wartzack, S.; Drummer, D.; Wittmann, S.; Stuppy, J.; Rietzel, D.; Tremmel, S.; Kühnlein, F.:
    Besonderheiten bei der Auslegung und Gestaltung lasergesinterter Bauteile. RTejournal - Forum für Rapid Technologie 7 (2010).
    URL: http://www.rtejournal.de/ausgabe7/2362/ [20.09.2010].
  • Geiger, M.; Frick, T.; Schmidt, M.:
    Optical Properties of Plastics and their Role for the Modelling of the Laser Transmission Welding Process. In: WGP-Annalen “Production Engineering - Research and Development”, Springer-Verlag GmbH, Heidelberg, DOI:10.1007/s11740-008-0141-1, Vol. 3/1, 2009, S. 59-55.
  • Von Wilmonsky, C.; Lutz, R.; Meisel, U.; Srour, S.; Rupprecht, S.; Toyoshima, T.; Nkenke, E.; Schlegel, K. A.; Pohle, D.; Münstedt, H.; Rechtenwald, T.; Schmidt, M.:
    In Vivo Evaluation of ß-TCP Containing 3D Laser Sintered Poly(etheretherketone) Composites in Pigs. In: Journal of Bioactive and Compatible Polymers 24 (2009) 1, S. 169-184.
  • Geiger, M.; Frick, T.; Schmidt, M.:
    Optical Properties of Plastics and their
    Role for the Modelling of the Laser Transmission Welding Process. Production Engineering 3 (2009) 1, S. 59-55.
  • Königer, T.; Rechtenwald, T.; Al-Naimi, I.; Frick, T.; Schmidt, M.; Münstedt, H.:
    CO2-Laser Treatment of Indium Tin Oxide Nanoparticle Coatings on Flexible Polyethyleneterephthalate Substrates. Journal of Coatings Technology and Research 7 (2009) 2, S. 261-269.
  • Von Wilmowsky, C.; Vairaktaris, E.; Pohle, D.; Rechtenwald, T.; Lutz, R.; Münstedt, H.; Koller, G.; Schmidt, M.; Neukam, F. W.; Schlegel, K. A.; Nkenke; E.:
    Effects of bioactive glass and β-TCP containing three-dimensional laser sintered polyetheretherketone composites on osteoblasts in vitro. Journal of Biomedical Materials Research - Part A, Wiley Inter-Science 87 (2008) 4, S. 896-902.
  • Schmidt, M.; Rechtenwald, T.; Pohle, D.:
    Selective Laser Sintering of PEEK. CIRP Annals - Manufacturing Technology 56 (2007) 1, S. 205-208.
  • Frick, T.:
    Temperaturfeldberechnungen beim Laserstrahlschweißen von Kunststoffen. In: Geiger, M.; Schmidt, M. (Hrsg.): Laser in der Elektronikproduktion & Feinwerktechnik 2007, Meisenbach Verlag, (Bamberg, 2007) - Tagungsband, S. 93-103.

Teilprojekt B4

  • Schwerdtfeger, J.; Heinl, P.; Singer, R. F.; Körner, C.:
    Auxetic cellular structures through selective electron-beam melting. Phys. Status Solidi B 247 (2010) 2, S. 269-272.
  • Attar, E., Körner, C.:
    Lattice Boltzmann Model for Thermal Free Surface Flows with Liquid-Solid Phase Transition. International Journal of Heat and Fluid Flow (2010).
  • Körner, C.; Attar, E.:
    Numerical Simulation of Foam Solidification Phenomena. In: Proceeding Metfoam 2009, (Bratislava, Slowakei, 2009) - Tagungsband.
  • Attar, E.; Körner, C.:
    Lattice Boltzmann method for dynamic wetting problems, Journal of Colloid and Interface Science 335 (2009) 1, S. 84-93.
  • Heinl, P.; Körner, C.; Singer, R. F.:
    Selective electron beam melting of cellular titanium: Mechanical properties, Advanced Engineering Materials 10 (2008) 9, S. 882-888.
  • Heinl, P.; Müller, L.; Körner, C.; Singer, R. F.; Müller, F. A.:
    Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting. Acta Biomaterialia 4 (2008) 5, S. 1536-1544.
  • Körner, C.:
    Foam formation mechanisms in particle suspensions applied to metal foams, Materials Science and Engineering A 495 (2008) 1-2, S. 227-235.
  • Körner, C.:
    Integral Foam Molding of Light Metals: Technology, Foam Physics and Numerical Simulation. Berlin, Heidelberg: Springer Verlag, 2008.
  • Heinl, P.; Rottmair, A.; Körner, C.; Singer, R. F.:
    Cellular Titanium by Selective Electron Beam Melting. Advanced Engineering Materials 9 (2007) 9, S. 360-364.
  • Körner, C.; Pohl, T.; Rüde, U.; Thürey, N.; Zeiser, T.:
    Parallel Lattice Boltzmann Methods for CFD Applications. In: Bruaset, A. M.; Tveito. A.: Numerical Solution of Partial Differential Equations on Parallel Computers. Berlin, Heidelberg: Springer Verlag, 2006, S. 437-466.
  • Körner, C.; Thies, M.; Hofmann, T.; Thürey, N.; Rüde, U.:
    Lattice Boltzmann Model for Free Surface Flow for Modeling Foaming, Journal of Statistical Physics 121 (2005) 1-2, S. 179-196.
  • Körner, C.; Thies, M.; Singer, R.F.:
    Modelling of metal foaming with Lattice Boltzmann Automata. Advanced Engineering Materials 4 (2002), S. 765-769.

Teilprojekt B5

  • Ponader, S.; von Wilmowsky, C.; Widenmayer, M; Lutz, R.; Heinl, P.; Körner, C.; Singer, R. F.; Nkenke, E.; Neukam, F. W.; Schlegel, K. A.:
    In vivo performance of selective electron beam-melted Ti-6Al-4V structures. Journal of Biomedical Materials Research - Part A, 92 (2010) 1, S. 56-62.
  • Odenberger, E.-L.; Oldenburg; M.; Thilderkvist, P.; Stöhr, T.; Lechler, J.; Merklein, M.:
    Tool development based on modelling and simulation of hot sheet metal forming in titanium Ti-6Al-4V. In: Eva-Lis Odenberger: Concepts for Hot Sheet Metal Forming of Titanium Alloys (Lulea/Schweden, 2009) - Tagungsband, S. 1-17.
  • Heinl, P.; Müller, L.; Körner, C.; Singer, R. F.; Müller, F. A.:
    Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting. Acta Biomaterialia 4 (2008) 5, S. 1536-1544.
  • Merklein, M.; Lechler, J.:
    Determination of Material and Process Characteristics for Hot Stamping Processes of Quenchenable Ultra High Strength Steels with Respect of a Numerical Process Design. In: SAE World Congress 2008 (Detroit, USA, 15.-19. April 2008) - Tagungsband, Nr. 2008-0853.
  • Merklein, M.; Geiger, M.; Staud, D.; Kaupper, M.:
    An inverse approach to the numerical design of the process sequence of tailored heat treated blanks. In: WGP: Production Engineering - Research and Development 1. Berlin Heidelberg: Springer Verlag 2008, S. 15-20.
  • Heinl, P., Körner, C., Singer, R. F.:
    Selective electron beam melting of cellular titanium: Mechanical properties. Advanced Engineering Materials 10 (2008) 9, S. 882-888.
  • Heinl, P.; Rottmair, A.; Körner, C.; Singer, R.F.:
    Cellular Titanium by Selective Electron Beam Melting. Advanced Engineering Materials 9 (2007) 5, S. 360-364.
  • Merklein, M.; Lechler, J.; Geiger, M.:
    Characterization of the flow properties of the quenchenable ultra high strength steel 22MnB5. Annals of the CIRP 55 (2006) 1, S. 229-236.
  • Geiger, M.; Merklein, M.; Hoff, C.; Roll, K.; Lorenz, D.:
    Auslegung des Prozessfensters für die Blechumformung höchstfester Vergütungsstähle bei erhöhten Temperaturen. In: Forschungsvereinigung Stahlanwendung (Düsseldorf, 2006) - Tagungsband.
  • Pitz, M.; Merklein, M.; Giera, A.; Geiger, M.:
    Laser Assisted Bending and Roll Forming. In: Geiger, M.: Proceedings of the International Conference LANE (Bamberg, 2004) - Tagungsband, S. 1147-1156.
  • Geiger, M.; Merklein, M.:
    Determination of forming limit diagrams - a new analysis method for characterization of materials´ formability. Annals of CIRP 51 (2003) 1, S. 213-216.
  • Geiger, M.; Merklein, M.; Celeghini, M.; Eckstein, R.; Novotny, S.:
    New developments and perspectives in forming technology at the LFT. In: Singh, U. P.; Geiger, M.;

Teilprojekt B6

  • Rechtenwald, T.; Frick, T.; Schmidt, M.; Schüßler, F.; Rösch, M.; Hörber, J.; Feldmann, K.:
    Durability aspects of additive manufactured parts for advanced requirements. Journal of Plastics Technology, Kunststofftechnik 6 (2010) 5, S. 191-204.
  • Rechtenwald, T.; Frick, T.; Schmidt, M.:
    Potenzial des Laserstrahlsinterns von PEEK zur Erzeugung kleiner Bauteilstrukturen. RTejournal - Forum für Rapid Technologie 7 (2010),
    URL: http://www.rtejournal.de/ausgabe7/2533/ [2010-06-25].
  • Königer, T.; Rechtenwald, T.; Al-Naimi, I.; Frick, T.; Schmidt, M.; Münstedt, H.:
    CO2-Laser Treatment of Indium Tin Oxide Nanoparticle Coatings on Flexible Polyethyleneterephthalate Substrates. Journal of Coatings Technology and Research 7 (2009) 2, S. 261-269.
  • Von Wilmonsky, C.; Lutz, R.; Meisel, U.; Srour, S.; Rupprecht, S.; Toyoshima, T.; Nkenke, E.; Schlegel, K. A.; Pohle, D.; Münstedt, H.; Rechtenwald, T.; Schmidt, M.:
    In Vivo Evaluation of ß-TCP Containing 3D Laser Sintered Poly(ether ether ketone) Composites in Pigs. Journal of Bioactive and Compatible Polymers 24 (2009) 2, S. 169-184.
  • Geiger, M.; Frick, T.; Schmidt, M.:
    Optical Properties of Plastics and their Role for the Modelling of the Laser Transmission Welding Process. Production Engineering - Research and Development 3 (2009) 1, S. 49-55.
  • Klämpfl, F.; Schmidt, M.; Hagenah, H.:
    Intelligent irradiation planning for new laser applications. In: Proceedings of the 18th International Conference on Flexible Automation and Intelligent Manufacturing FAIM (Skövde, Schweden, 2008) - Tagungsband, S. 924 - 930.
  • von Wilmowsky, C.; Vairaktaris, E.; Pohle, D.; Rechtenwald, T.; Lutz, R.; Münstedt, H.; Koller, G.; Schmidt, M.; Neukam, F. W.; Schlegel, K. A.; Nkenke; E.:
    Effects of bioactive glass and β-TCP containing three-dimensional laser sintered polyetheretherketone composites on osteoblasts in vitro. Journal of Biomedical Materials Research - Part A, 87A (2008) 4, S. 896 902.
  • Rechtenwald, T.; Kopczynska, A.; Schmachtenberg, E.; Devrient, M.; Frick, T.; Schmidt, M.:
    Investigation of Material Compatibility for Embedding Stereolithography. In: Proceedings of the Conference Multi-Material Micro Manufacture 4M (2008) - Tagungsband, S. 105-108.
  • Schmidt, M.; Rechtenwald, T.; Pohle, D.:
    Selective Laser Sintering of PEEK. CIRP Annals - Manufacturing Technology 56 (2007) 1, S. 205-208.
  • Pohle, D.; Ponader, S.; Rechtenwald, T.; Schmidt, M.; Schlegel, K.A.; Münstedt, H.; Neukam, F. W.; Nkenke, E.; von Wilmowsky, C.:
    Processing of Three-Dimensional Laser Sintered Polyetheretherketone Composites and Testing of Osteoblast Proliferation in vitro. Macromolecular Symposia 253 (2007) 1, S. 65-70.

Teilprojekt C2

  • Leugering, G.; Stingl, M.:
    PDE-constrained Optimization for Advanced Materials. GAMM-Mitt. 33 (2010) 2, S. 179-200.
  • Haslinger, J.; Leugering, G.; Kočvara, M.; Stingl, M.:
    Multidisciplinary Free Material Optimization. SIAM J Appl Math 70 (2010) 7, S. 2709-2728.
  • Stingl, M.; Leugering, G.; Kočvara, M.:
    Free Material Optimization with Fundamental Eigenfrequency Constraints. SIAM J Optim 20 (2009) 1, S. 524-547.
  • Stingl, M.; Leugering, G.; Kočvara, M.:
    A sequential convex semidefinite programming algorithm with an application to multipleload free material optimization. SIAM J Optim 20 (2009) 1, S. 130-155.
  • Stingl, M.; Leugering, G.; Kočvara, M.:
    A new non-linear semidefinite programming algorithm with application to multidisciplinary free material optimization. International Series of Numerical Mathematics 158 (2009), S. 275-295.
  • Gaile, S.; Leugering, G.; Stingl, M.:
    Free Material Optimization for Plates and Shells. System Modeling and Optimization, IFIP Advances in Information and Communication Technology 312 (2009), S. 239-250.
  • Leugering, G.; Martin, A.; Stingl, M.:
    Topologie und dynamische Netzwerke: Anwendungen Der Optimierung mit Zukunft. Produktionsfaktor Mathematik 4 (2009), S. 323-338.
  • Kočvara, M.; Stingl, M.; Zowe, J.:
    Free Material Optimization: recent progress. Optimization 57 (2008), S. 79-100.
  • Kočvara, M.; Stingl, M.:
    On the solution of large-scale SDP problems by the modified barrier method using iterative solvers. Mathematical Programming Series B 109 (2007) 2-3, S. 413-444.
  • Kočvara, M.; Stingl, M.:
    Free Material Optimization: Towards the Stress Constraints. Structural and Multidisciplinary Optimization 33 (2007) 4-5, S. 323-335.
  • Kočvara, M.; Stingl, M.:
    The worst-case multipleload FMO problem revisited. In: M.P. Bendsoe, N. Olhoff and O. Sigmund, IUTAM-Symposium on Topological Design Optimization of Structures, Machines and Material: Status and Perspectives, Springer Verlag, 2006, S. 403-411.
  • Kočvara, M.; Stingl, M.:
    Solving nonconvex SDP problems of structural optimization with stability control. Optimization Methods and Software 19 (2004) 5, S. 595-609.

Teilprojekt C3

  • Schmidt, U.; Mergheim, J.; Steinmann, P.:
    Multiscale parameter identification. Inter-national Journal for Multiscale Computational Engineering (2010), zur Veröffentlichung angenommen.
  • Hossain, M.; Possart, G.; Steinmann, P.:
    A Finite Strain Framework for the Simulation of Polymer Curing. Part II. Viscoelasticity and shrinkage. Computational Mechanics 46 (2010) 5, S. 363-375.
  • Mergheim, J.:
    A Variational Multiscale Method to Model Crack Propagation at Finite Strains. International Journal for Numerical Methods in Engineering 80 (2009), S. 269-289.
  • Mergheim, J.; Kuhl, E.; Steinmann, P.:
    Towards the algorithmic treatment of 3D strong discontinuities. Communications in Numerical Methods in Engineering 23 (2007), S. 97-108.
  • Mergheim, J.; Steinmann, P.:
    A geometrically nonlinear FE approach for the simulation of strong and weak discontinuities. Computer Methods in Applied Mechanics and Engineering 195 (2006) 37-40, S. 5037-5052.
  • Menzel, A.; Ekh, M.; Runesson, K.; Steinmann, P.:
    A Framework for Multiplicative Elastoplasticity with Kinematic Hardening, Coupled to Anisotropic Damage. Interna-tional Journal of Plasticity 21 (2005) 3, S. 397-434.
  • Mergheim, J.; Kuhl, E.; Steinmann, P.:
    A finite element method for the computational modelling of cohesive cracks. International Journal for Numerical Methods in Engineering 63 (2005), S. 276-289.
  • Steinmann, P.; Häsner, O.:
    On Material Interfaces in Thermomechanical Solids. Archive of Applied Mechanics 75 (2005), S. 31-41.
  • Mergheim, J.; Kuhl, E.; Steinmann, P.:
    A hybrid discontinuous Galerkin/interface method for the computational modelling of failure. Communications in Numerical Methods in Engineering 20 (2004) 1, S. 511-519.
  • Kuhl, E.; Menzel, A.; Steinmann, P.:
    Computational Modelling of Growth. A Critical Review, a Classification of Concepts and Two New Consistent Approaches. Computational Mechanics 32 (2003), 1-2, S. 71-88.
  • Menzel, A.; Steinmann, P.:
    On the Spatial Formulation of Anisotropic Multiplicative Elasto-Plasticity. Computer Methods in Applied Mechanics and Engineering 192 (2003) 31-32, S. 3431-3470.
  • Runesson, K.; Steinmann, P.; Larsson, R.:
    On Localization in Thermo-Elastoplastic Solids Subjected to Adiabatic Conditions. European Journal of Mechanics A/Solids 18 (1999) 4, S. 557-579.

Teilprojekt C4

  • Drummer, D.; Rietzel, D.; Kühnlein, F.:
    Development of a characterization approach for the sintering behavior of new thermoplastics for selective laser sintering. Physics Procedia 5 (2010) 1, S. 533-542.
  • Kühnlein, F.; Drummer, D.; Rietzel, D.:
    Degradation Behavior and Material Properties of PA12-Plastic Powders Processed by Powder Based Additive Manufacturing Technologies. In: International Conference on Additive Technologies 2010 (Nova Gorica, Slovenia, 22.-24.09.2010) - Tagungsband.
  • Rietzel, D.; Kühnlein, F.; Drummer, D.:
    Characterization of new thermoplastics for additive manufacturing by selective laser sintering. In: 68th Annual Technical Conference of the Society of Plastics Engineers 2010, ANTEC 2010 (Orlando, USA, 16.-20.05.2010) - Tagungsband, S. 2247-2253.
  • Kühnlein, F.; Rietzel, D.; Drummer, D.:
    Feasibility Study of Additive Manufacturing of Thermally Conductive PA12 Powders by Selective Mask Sintering. In: 68th Annual Technical Conference of the Society of Plastics Engineers 2010, ANTEC 2010 (Orlando, USA, 16.-20.05.2010) - Tagungsband, S. 2295-2300.
  • Weickmann, J.; Weckenmann, A.; Brenner, P. -F.:
    Automatic, Task-Sensitive and Simulation-Based Optimization of Fringe Projection Measurements. Key Engineering Materials 437 (2010), S. 439-443.
  • Drummer, D.; Rietzel, D.; Kühnlein, F.:
    Selektives Lasersintern von teilkristallinen Thermoplasten. In: RTejournal - Forum für Rapid Technologie 6 2009.
    URL: http://www.rtejournal.de/ausgabe6/2214/ [20.09.2010].
  • Drummer, D.; Kühnlein, F.; Rietzel, D.:
    Funktionalisierte Bauteile durch Selektives Maskensintern. RTejournal - Forum für Rapid Technologie 6 (2009).
    URL: http://www.rtejournal.de/ausgabe6/2215/ [20.09.2010].
  • Weickmann, J.; Liedl, A.; Brenner, P.-F.; Weckenmann, A.:
    Reconstruction of noisy measured sharp edges at thin sheet metal components. In: Osten, W.; Kujawinska, M. (Hrsg.): FRINGE 09 - The 6th International Workshop on Advanced Optical Metrology. Heidelberg: Springer, 2009, S. 180-183.
  • Weckenmann, A.; Weickmann, J.; Hartmann, W.:
    Model and simulation of fringe projection measurements as part of an assistance system for multi-component fringe projection sensors. In: Duparré, A; Geyl, R. (Hrsg.): Optical Fabrication, Testing and Metrology III, Proceedings of SPIE 7102 (2008) - Tagungsband, S. 71020N.1-71020N.12.
  • Al-Sheyyab, A.; Cojutti, M.; Schmidt, J.; Stockinger, A.; Stoll, T.; Schuck, M.; Topic, I.; Weickmann, J.; Wittmann, S.; Ziegler, C.:
    Produktdatenmanagement als effizientes Werkzeug zur Vernetzung von Forschungsprojekten. Zeitschrift für wirtschaftlichen Fabrikbetrieb ZWF 102 (2007) 11, S. 765-770.
  • Weckenmann, A.; Weickmann, J.; Petrovic, N.:
    Shortening of Inspection Processes by Virtual Reverse Deformation. In: Akkök, M.; Budak, E., Firat, M. Kaftanoglu, B. (Hrsg.): 4th International Conference and Exhibition on Design and Production of Machines and Dies/Molds. (Ankara, Türkei, 2007) - Tagungsband, S. 391-398.
  • Weckenmann, A.; Weickmann, J.:
    Optical inspection of formed sheet metal parts applying fringe projection systems and virtual fixation. Metrology and Measurement Systems XIII (2006) 4, S. 321-334.